Products
Our quality parts are not only available to the big budget race teams, we have designed and manufactured a large range of components to suit everything from the club racer to the serious professional.
Race Products
Read moreScrew adjustable Watt’s linkage kits
For the ultimate in fine tuning of live axle rear roll centre. Race Products’ screw adjustable Watt’s linkage kit is the ultimate in fine roll centre tuning with ease. In this universal kit, the roll centre adjustment is carried out in seconds by twisting the threaded shaft from the boot area allowing adjustment in 1mm […]
Axles
What is a floater axle? In a full floating rear end, the axle does one job: transmit torque from the diff to the wheel. The hub, bearings and housing carry the weight of the car, handle cornering and braking loads, and locate the wheel. The axle just drives. That’s what “floating” means — the axle […]
Read moreCustom axles
Race Products manufacture custom axles and shafts for motorsport, performance vehicles, and industrial applications. If our standard stocked range doesn’t cover what’s needed, we can machine it to suit. Custom lengths, spline counts, materials and configurations are all available. All custom axles are machined in-house at our Brisbane facility from billet material, heat treated in […]
Floater axles
Race Products stock a large range of Australian-made floater axles in 4340 chromoly and 300M-VAR steel, all machined and heat treated at our Brisbane facility. In a full floating rear end, the axle does one job: transmit torque from the diff to the wheel. The hub, bearings and housing carry the weight of the car, […]
Diff housings
What is a diff housing and why does it matter? A diff housing is the foundation of your rear end. It does far more than simply hold the centre – it locates the axles and wheel mounting faces, carries suspension and torque loads, and keeps everything aligned under acceleration, braking and cornering. When the housing […]
Read moreCambered axles
Spare and replacement ball drive camber axles to suit our cambered floating hub kits, available in high tensile EN26 or premium 300M. Race Products’ cambered CV ball drive axles are widely used in circuit racing, speedway, tarmac and gravel rally. The system uses drive plates with an integral CV joint cup, matched with a one-piece […]
Read morePeg adjustable Watt’s linkage kits
For easy adjustment and fine tuning of live axle rear roll centre. In our easy to use peg adjustable Watt’s linkage kits, adjusting the roll centre is carried out under the car by simply loosening the pivot bolt and moving the locating washer up or down. As with our screw adjustable kit, the body mounted […]
Floater kits
High-Performance Axle and Hub Assembly Solutions What is a floater kit? A floater kit is a heavy-duty alternative to a flanged axle setup. In a flanged setup, the axle shaft carries everything: drive, vehicle weight, braking force and cornering load. In a full floating setup, those loads are handled by the hub, bearings and housing. […]
Read moreRoundback Style Housings
A clean, new 9″ housing for your street rod or cruiser – without the Marketplace headache. Our roundback style housings give you the smooth, clean profile you want under a hot rod, street rod or cruiser, without having to hunt down an original housing that may cost almost as much to clean up, narrow or […]
Read moreTraditional Wide Shoulder 9″ Housings
All the muscle car look and strength you’d expect from a wide shoulder housing, without stepping up to a full sheet metal setup. An ideal choice for circuit cars, street rods and cruisers, these housings deliver the classic wide shoulder appearance while providing the strength and reliability needed for higher-performance applications. Every housing is designed […]
Read moreSheet Metal Toyota Hilux Diff Housings
Race Products Fabricated Toyota G Series Sheet Metal Diff Housings Designed for high-performance street, drag racing and circuit applications, our fabricated Toyota G Series housings deliver the strength, rigidity and reliability demanded by serious builds. Whether you’re building a lightweight high-horsepower car, a rotary or turbo 4-cylinder combination, or simply want the perfect finishing touch […]
Read moreSheet Metal 9″ Diff Housings
RP9 fabricated sheet metal Ford 9” diff housings Our RP9 range covers more than thirty fabricated sheet metal 9-inch housing configurations – from basic non-braced street setups through to fully braced race housings. Every housing is hand fabricated and CNC finished to provide a straight, accurate foundation for your build. With more than 5,000 RP9 […]
View more products